Contact us

RigiMill MT

The RigiMill Moving Table (MT) is the fixed-gantry plus moving table design. Its working envelope is suitable for shorter parts, up to 240” (6,000 mm) long. RigiMill MT provides highest quality in precision and rigidity.

Product information Highlights Technical specification Case studies Video Request a quote

Product Information

The RigiMill Moving Table (MT) is the fixed-gantry plus moving table design, with identical bridge structure as the RigiMill Moving Gantry (MG). RigiMill MT provides the highest quality in precision and rigidity, with chip removal rates up to 55 cubic inches/min (0.9 liter) in titanium and 1,000 cubic inches/min (16.4 liters) in aluminum.

RigiMill MT is equally as compact as the RigiMill MG but requires less floor space. Its working envelope is suitable for shorter parts, up to 240” (6,000 mm) long. When offered with Modig standard pallet system, it has an impressive minimum foot print within a fully automatic palletized cell.

The RigiMill MT design includes a complete machine housing where the parts are processed into a fully covered working zone.

RigiMill MT is available in three sizes 80” (2,000 mm), 160” (4,000 mm) or 240” (6,000 mm).


SUCCESS STORY – MODIG AND ASCO INDUSTRIES

Asco Industries was looking for a precise finishing machine for titanium military airplane parts. The key characteristics were a robust and precise machine to ensure a good and stable quality output. From that viewpoint, MODIG provided a solution with the moving table gantry machine type.

The machine has proven to meet the required precision and is a good solution for the required capabilities, and we recently achieved 100% uptime with an average of 98%. 

SUCCESS STORY: MODIG AND ASCO

Vertical machining center, MODIG RigiMill, designed and built with high rigidity, high dynamic stability and precision technology modules
MODIG Vertical Machining Center, machining in the RigiMill Moving Table

Highlights

Up to 1,000 cubic inches (16.4 liters) of chip removal per minute in aluminum

Up to 55 cubic inches (0.9 liter) of chip removal per minute in titanium

RigiMill Moving Table provides highest quality in precision and rigidity

Automatic pallet system up to 240” (6,000 mm)

Full automation options available

Balluff chip system for cutting tool identification

Accelerations, X-Y-Z-axes 26 ft/sec² (8 m/sec²)

Small footprint

Robotic tool loading with tool magazine up to 100 tools

Fully enclosed with implemented safety functions


Technical Specification


Travels

X-axis 2,500, 4,500 or 6,500 mm 100, 180 or 260 in
Y-axis 1,560 mm 61 in
Z-axis 900 mm 35 in
A-axis +/- 110 degrees +/- 110 degrees
C-axis +/- 360 degrees +/- 360 degrees

Max Part Cross Section

Length 2,000, 4,000 or 6,000 mm 80, 160 or 240 in
Width 1,400 mm 55 in
Height 700 mm 30 in

Aluminum Spindle

Speed up to 30,000 rpm up to 30,000 rpm
Power S1 up to 200 kW up to 272 hp

Hard metal spindle

Speed 0-12,000 rpm 0-12,000 rpm
Torque S1 500-2,500 Nm 370-1,845 ft-lbs

Tool Changer

Number of tools 100 100
Tool taper HSK63-125A HSK63-125A
Tool changing time 14 sec, chip to chip 14 sec, chip to chip

Feed rates

X-Y-Z-axes 0-70 m/min 0-2,800 in/min
A and C-axes 360 degrees/sec 360 degrees/sec

Acceleration

Acceleration 8 m/square second 26 ft/square second

Material

Aluminum, composite, cast iron, steel, titanium


WING RIB – TIME SAVINGS 54%

WING RIB – TIME SAVINGS 54%
Commercial Aircraft
Material: Aluminum

Previous time*: 64 minutes
RigiMill MT time: 29 minutes
Time Savings: 35 minutes (54%)

Width: 12″ (300 mm)
Length: 75″ (1,900 mm)
Thickness: 1.5″ (40 mm)


Video

RigiMill MT with automatic pallet system, pallet mover and buffer station.