3- 4- or 5-axis. Single spindle. Vertical moving table machine. Max part size: 240” x 79” x 32” (6,000 x 2,000 x 820 mm). Watch RigiMill MT in action
Options: Spindle power and torque, 3- 4- or 5-axis, tool magazine and tool holder.
Automation: Pallet system.
Materials: Cast iron, Aluminum, Titanium, Composite and Steel.
Industries: Aerospace, Heavy equipment and more.
The RigiMill Moving Table (MT) is the fixed-gantry plus moving table design, with identical bridge structure as the RigiMill Moving Gantry (MG). RigiMill MT provides the highest quality in precision and rigidity, with chip removal rates up to 55 cubic inches/min (0.9 liter) in titanium and 1,200 cubic inches/min (19.7 liters) in aluminum.
RigiMill MT is equally as compact as the RigiMill MG but requires less floor space. Its working envelope is suitable for shorter parts, up to 240” (6,000 mm) long. When offered with Modig standard pallet system, it has an impressive minimum footprint within a fully automatic palletized cell.
The RigiMill MT design includes a complete machine housing where the parts are processed into a fully covered working zone.
RigiMill MT is available in three sizes 80” (2,000 mm), 160” (4,000 mm) or 240” (6,000 mm) with an option for a wider table.
Discover more about the exceptional speed and rigidity of RigiMill MT in the informative article RigiMill vs. Traditional Multi-Gantry Machine. This article provides a detailed comparison between the machine and traditional multi-gantry machines.
Asco Industries was looking for a precise finishing machine for titanium airplane parts. The key characteristics were a robust and precise machine to ensure a good and stable quality output. From that viewpoint, MODIG provided a solution with the moving table gantry machine type.
The machine has proven to meet the required precision and is a good solution for the required capabilities, and we recently achieved 100% uptime with an average of 98%.
Are you keeping up with the amazing technology releases at MODIG?
Subscribe to our newsletter and receive the latest news of webinars, products and more!
Up to 1,000 cubic inches (16.4 liters) of chip removal per minute in aluminum
Up to 55 cubic inches (0.9 liter) of chip removal per minute in titanium
RigiMill Moving Table provides highest quality in precision and rigidity
Industry leading spindle performance
Most-rigid compact gantry in the world
Roughing and finishing in the same machine
Increased productivity per square foot higher than competitors
Cycle time reduction is generally 40% over multi spindle machines – per part!
Feed rate of 2,800” per minute in all axis
Automatic pallet system up to 240” (6,000 mm)
Full automation options available
Balluff chip system for cutting tool identification
Accelerations, X-Y-Z-axes 26 ft/sec² (8 m/sec²)
Small footprint
Robotic tool loading with tool magazine up to 100 tools
Fully enclosed with implemented safety functions
| X-axis | 2,500, 4,500 or 6,500 | mm | 100, 180 or 260 | in |
| Y-axis | 1,560 or 2,000 | mm | 61 or 79 | in |
| Z-axis | 820 | mm | 32 | in |
| A-axis | +/- 110 | degrees | +/- 110 | degrees |
| C-axis | +/- 360 | degrees | +/- 360 | degrees |
| Length | 2,000, 4,000 or 6,000 | mm | 80, 160 or 240 | in |
| Width | 1,400 | mm | 55 | in |
| Height | 700 | mm | 30 | in |
| Speed | up to 30,000 | rpm | up to 30,000 | rpm |
| Power S1 | up to 200 | kW | up to 272 | hp |
| Speed | 0-12,000 | rpm | 0-12,000 | rpm |
| Torque S1 | 500-2,500 | Nm | 370-1,845 | ft-lbs |
| Number of tools | 100 | 100 | ||
| Tool taper | HSK63-125A | HSK63-125A | ||
| Tool changing time | 14 | sec, chip to chip | 14 | sec, chip to chip |
| X-Y-Z-axes | 0-70 | m/min | 0-2,800 | in/min |
| A and C-axes | 360 | degrees/sec | 360 | degrees/sec |
| Acceleration | 8 | m/square second | 26 | ft/square second |
| Aluminum, composite, cast iron, steel, titanium |
WING RIB – TIME SAVINGS 59%
Commercial Aircraft
Material: Aluminum
Previous time*: 64 minutes
RigiMill MT time: 26 minutes
Time Savings: 38 minutes (59%)
Width: 12″ (300 mm)
Length: 75″ (1,900 mm)
Thickness: 1.5″ (40 mm)
RigiMill MT with automatic pallet system, pallet mover and buffer station.
The HHV, its process and machining in one setup.
