Raw material is loaded from the left side into the machine. The HHV automatically pulls the raw material into position for machining. The HHV handles uncut bars and extrusions with unlimited length.
Rotary table with CNC controlled pad clamping pressure
Max part cross section
Different part programs on the same extrusion or bar. Full automation options available.
Aluminum spindle: 30,000 rpm, 60hp (45kW)
Hard metal spindle: 20,000 rpm. 59 ft-lbs (80Nm)
Standard with 55 tools and more on request. Tool changing time: 8 sec, chip to chip.
Finished parts delivers into a part catcher.
The HHV is designed for safe operation with high speed machining.
4- or 5-axis. Single spindle. Extrusion- or bar machining. Max part size: Extrusion 6 x 10” (150 x 250 mm), Bar 5 x 5” (127 x 127 mm) with option for larger size of bar/extrusion. Horizontal machining center with 2 rotary tables.
Options: Spindle power and torque, 4- or 5-axis, tool magazine and tool holder.
Automation: Bar feeder system, robot loading/unloading.
Materials: Aluminum and Composite
Industries: Automotive, Extrusion, Aerospace and more.
The HHV (Horizontal High Velocity) was developed in close cooperation with the world’s largest aircraft manufacturers. Since its introduction, it quickly became the first choice of top performing machine shops.
The HHV is a universal machining center for bar or extrusion components. It is ideal for short repetitive runs, nesting, or high-volume production. The raw material is loaded from the left side into the machine, the HHV automatically pulls the raw material into position for machining and delivers the finished parts into a part catcher. No pre-cutting of the raw material required, the HHV handles uncut bars and extrusions. The benefit of making many parts from the same size bar or extrusion is: reduced set-up time, no workholding and a significant reduction in cycle time. Standard machining often requires multiple setups. The HHV machines parts complete in one setup, with no work holding. Learn more about the exceptional MODIG bar machining process by reading the article, Bar Machining. The Modig Way VS. Conventional Machining.
Your machining cycle time at the process design stage: up to 50% faster machining time over conventional processes, and, true Lean and Green production.
HHV 2 and HHV 3 designate the number of rotary tables.
– David Modig, President Modig Machine Tool
Learn more about our innovative HHV machining solutions!
To ensure your machine continues to perform at its best, it’s important to conduct regular preventive maintenance. By monitoring your machining center, replacing any worn-out parts and consumables, and conducting consistent maintenance, you can ensure your machine remains in excellent condition and operates with the same precision and speed as it did when it was first purchased. Discover more about the importance of preventive maintenance and how to locate necessary wear parts and consumables to keep your HHV in top condition for peak performance. Check out our article, Preventive Maintenance: Give Yourself Peace of Mind.
Are you keeping up with the amazing technology releases at MODIG?
Subscribe to our newsletter and receive the latest news of webinars, products and more!
Bar and extrusion machine in one
Better chip flow – from horizontal machining
Complete parts in one setup
Reduced cycle time up to 40-70%
Material waste reduction
High production rate capabilities
Angle head machining possibilities
Roughing, semi-finish and finishing mode
A small footprint
Low fixture and tooling costs
Modular workholding designs for setup elimination
Different part programs on the same extrusion or bar (nesting)
No special foundation required
Full automation options available
Balluff chip system for cutting tool automation
| X-axis | 1500 | mm | 60 | in |
| Y-axis | 420 | mm | 20 | in |
| Z-axis | 260 | mm | 10 | in |
| U1-axis | 1170 | mm | 46 | in |
| B-axis optional | +/- 15 | degrees | +/- 15 | degrees |
| A1/A2-axis | 190 | degrees | 190 | degrees |
| Bar (options for larger bar size available) | 127 x 127 | mm | 5 x 5 | in |
| Extrusion (options for larger extrusion size available) | 150 x 250 | mm | 6 x 10 | in |
| Feed rates | 0-60 | rpm | 0-60 | rpm |
| Jaw change system | Quick change 1 min /rotary chuck | Quick change 1 min /rotary chuck | ||
| Number of rotary tables | 2 | 2 |
| Speed | 0-30,000 | rpm | 0-30,000 | rpm |
| Power S1 | 45 | kW | 60 | hp |
| Number of tools standard | 55 | and more on request | 55 | and more on request |
| Tool taper | HSK-A63 | HSK-A63 | ||
| Tool changing time | 8 | sec/chip to chip | 8 | sec/chip to chip |
| X-Y-Z axes | 0-60 | m/min | 0-2,400 | in/min |
| A-axis, A1 and A2 | 60 | rpm/min | 60 | rpm/min |
| B-axis, optional | 60 | rpm/min | 60 | rpm/min |
| 10 | m/square second | m/min | 32 | ft/square second |
| Aluminum, composite |
CASE STUDY – LINK
Commercial Aircraft
Material: Aluminum
Previous time*: 97 minutes
HHV time: 23 minutes
Time Savings: 74 minutes (76%)
Width: 4″ (95 mm)
Length: 23″ (580 mm)
Thickness: 3″ (70 mm)
CASE STUDY – AIRLOAD RIB
Commercial Aircraft
Material: Aluminum
Previous time*: 24 minutes
HHV time: 12 minutes
Time Savings: 12 minutes (50%)
Width: 1″ (28 mm)
Length: 10″ (260 mm)
Thickness: 5″ (120 mm)
CASE STUDY – AIRCRAFT PART
Aircraft
Material: Aluminum
Previous time*: 46 minutes
HHV time: 19 minutes
Time Savings: 27 minutes (59%)
Width: 3″ (70 mm)
Length: 12″ (300 mm)
Thickness: 2.5″ (62 mm)
CASE STUDY – SEAT TRACK
Commercial aircraft
Material: Aluminum
MODIG HHV is 50-70% faster than conventional methods when machining seat tracks.
Watch seat track machining here
Time Savings: 50-70% faster
*Previous time with well-known multi machining center